var reference = new Array(); reference[1]='Richard D. Peacock, Paul .A. Reneke, Walter W. Jones, Richard W. Bukowski, Building and Fire Research Laboratory, NIST. Gaithersburg MD 20899, USA, Vytenis Babrauskas, Fire Science and Technology, Inc USA, Concepts for Fire Protection of Passenger Rail, Transportation Vehicles Past, Present, and Future, Fire and materials, VOL 19,71-87 (1995)'; reference[2]='HIFI, High Fire Performance Wood Products, http://www.fireretard.com/'; reference[3]='CREPIM, Parc de La Porte Nord, Rue Christophe Colomb, 62700, Bruay La Buissière, France, Tel : 00 33 3 21 61 64 00, Fax: 00 33 3 21 61 64 01, crepim@wanadoo.fr'; reference[4]='Babrauskas, V. & Grayson, S.J. 1992. Heat release in fires. Elsevier science publishers Ltd. 644 p.'; reference[5]='Troitzsch, J.1990. International plastics flammability handbook. Principles -regulations - testing and approval. 2nd ed., Carl Hanser Verlag, Kolbergerstr. 22, D-8000 München 80, 517 p.'; reference[6]='Richard D. Peacock, Richard W. Bukowski, Walter W. Jones, Paul .A. Reneke, , James E. Brown, Building and Fire Research Laboratory, NIST. Gaithersburg MD 20899, USA, Vytenis Babrauskas, Fire Science and Technology, Inc USA, Fire Safety of Passengers Trains: a Review of current approaches and New Concepts, NISY technical Note 1406, January 1994.'; reference[7]='Fire Testing Technology, P.O. Box 116, Eadt Grinstead, West Sussex, RH19 4FP,UK'; reference[8]='ISO/CD 11925-2. 1994. Fire tests - Reaction to fire - Ignitability of building products under direct flame impingement - Part 2: Single flame source test. International Organization for Standardization. 36 p.'; reference[9]='ISO/CD 11925-3. 1994. Fire tests - Reaction to fire - Ignitability of building products under direct flame impingement - Part 3: Multisource test. International Organization for Standardization. 21 p.'; reference[10]='ISO/TC92/SC1/WG2 N268. August 1996. Guidance document on ignitability. 35 p.'; reference[11]='ISO/DIS 5657. 1996. Reaction to fire tests - Ignitability of building products using a radiant heat source. International Organization for Standardization. 42 p.'; reference[12]='ISO/DIS 5658-2. 1993. Fire tests - Reaction to fire - Lateral surface spread of flame on building products with specimen in vertical configuration. International Organization for Standardization. 34 p.'; reference[13]='ISO/DIS 9239-2. 1995. Fire tests - Reaction to fire - Horizontal surface spread of flame on floor coverings using a radiant heat ignition. International Organization for Standardization. 27 p.'; reference[14]='ISO CD 13785. Fire tests - Reaction to fire - Part 1- Intermediate-scale test for facades. 8 p.'; reference[15]='ISO WD 13785. Fire tests - Reaction to fire - Full-scale tests for facades. (Canada-Germany Joint Submission).11 p.'; reference[16]='ISO 5660. 1993. Fire tests - Reaction to fire - Part 1: Rate of heat release from building products (Cone calorimeter method). International Organization for Standardization. 31 p.'; reference[17]='ISO 9705. 1993. Fire tests - Full-scale room test for surface products. International Organization for Standardization. 31 p.'; reference[18]='ISO/CD 5660. 1996. Fire tests - Reaction to fire - Part 2: Smoke release rate from building products (dynamic measurement). International Organization for Standardization. 15 p.'; reference[19]='ISO/DIS 5659-2. 1993. Plastics - Smoke generation - Part 2: Determination of specific optical density by a single-chamber test. International Organization for Standardization. 46 p.'; reference[20]='prEN ISO 1716-Part 2. Fire test for building materials: Reaction to fire.Determination of gross calorific value.'; reference[21]='COMMISSION DECISION (2000/147/EC) of 8 February 2000 implementing Council Directive 89/106/EEC as regards the classification of the reaction to fire performance of construction products, Ref. OJ L 50, 23.2.2000, p.14)'; reference[22]='prEN ISO 11925-2. Reaction to fire tests - Ignitability of building products subjected to direct impingement of flame.'; reference[23]='prEN ISO.9239-1 Floor coverings - Determination of the burning behaviour using a radiant heat source.European Committee for Standardization. 19 p.'; reference[24]='IMO Resolution A.653(16) adopted on 19 October 1989. Recommendation on improved fire test procedures for surface flammability of bulkhead, ceiling and deck'; reference[25]='finish materials. International Maritime Organization. 42 p.'; reference[26]='IMO Resolution A.687(17) adopted on 6 November 1991. Fire test procedures for ignitability of primary deck coverings. International Maritime Organization. 2 p.'; reference[27]='IMO Resolution MSC.41(64) adopted on 5 December 1994. Interim standard for measuring smoke and toxic products of combustion. International Maritime Organization. 4 p.'; reference[28]='IMO Resolution MSC.61(67) Adoption of the International Code for Application of Fire Test Procedures. December 1996.'; reference[29]='Fire and Flammability Bulletin. April 1995. IMO to allow more polymers to be used in high speed craft. p. 2-3.'; reference[30]='ISO/TC93/SC3/WG1/N509. 1996. Assessment of fire smoke toxicity tests. 21 p.'; reference[31]='Eurocode ENV 1995-1-2:1994.'; reference[32]='ASTM E-162, Standard Teat Method for Surface Flammability of Materials Using a Radiant Heat Energy Source, Annual Book of ASTM Standards, Volume 04.07. American Society for Testing and Materiais (1988).'; reference[33]='ASTM D 3675, Standard Test Method for Surface Flammability of Cellular Materials Using a Radiant Heat Energy Source, Annual Book of ASTM Standards, Volume 09.02, American Society for Testing and Materials (1990).'; reference[34]='ASTM E-662, Standard Teat Method for Specific Opticai Density of Smoke Generated by Soiid Materials,. Annual book of ASTM Standards, Volume 04.07, American Society for Testing and Materials (1983).'; reference[35]='ASTM E-1354, Standard Test Method for Heat and Visible Smoke Release Rate for Materials and Products Using an Oxygen Consumption Calorimeter, Annual Hook of ASTM Standards, Volume 04.07, American Society for Testing and Materials, (1 990).'; reference[36]='ASTM E-648, Standard Teat Method for Critical Radiant Flux of Floor Covering Systems Using a Radiant Heat Energy Source, Annual Book of ASTM Standards, Volume 04.07, American Society for Testing and Materials (1988).'; reference[37]='ASTM E-84, Standard Teat Method for surface burning characteristics of building material, Annual Book of ASTM Standards, Volume 04.07, American Society for Testing and Materials (1999).'; reference[38]='UL Standard for Safety for Test for Flammability of Plastic Materials for Parts in Devices and Appliances, Underwriters Laboratories Inc. (UL), 333 Pfingsten Road, Northbrook, IL 60062-2096, Fifth Edition, Dated October 29, 1996, revisions through and including May 22, 2001.'; reference[39]='Federal Motor Vehicle Standard safety, 49 CFR Ch. V (10-1-99 Edition), § 571.302 Standard No. 302; Flammability of interior materials.'; reference[40]='ISO 3795: road vehicles, and tractors and machinery for agriculture and forestry -Determination of the burning behaviour of material.'; reference[41]='Department of transportation Federal Aviation Administration 14 CFR Parts 25, 91, 121, 125, and 135 [Docket No. FAA-2000-7909; Notice No. 00-09], RIN 2120-AG91, Improved Flammability Standards for Thermal/Acoustic Insulation Materials Used in Transport Category Airplanes, Federal Register / Vol. 65, No. 183 / Wednesday, September 20, 2000.'; reference[42]='JAR Part 25, Appendix F, Part l, para. (a) (1) (i), Change 14'; reference[43]='FAR Part 25, Appendix F, Part l, para. (a) (1) (i), Amdt. 25-83'; reference[44]='Airbus Directives (ABD) and Procedures, Fireworthiness Requirements, ABD 0031, Pressurized Section of Fuselage, Airbus Industrie 1997, Airbus Industrie, Programmes and Processes Directorate, 31707 Blagnac CEDEX, France'; reference[45]='American Society for Testing and Materials (ASTM). Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products. ASTM E 906. Annual Book of ASTM Standards, Volume 04.07, 1997.'; reference[46]='Babrauskas, V. \"Comparative Rates of Heat Release from Five Different Types of Test Apparatuses.\" Journal of Fire Sciences 4 (1986)'; reference[47]='Babrauskas, V. \"Development of the Cone Calorimeter, A Bench-scale Heat Release Rate Apparatus Based on Oxygen Consumption.\" Fire and Materials 8 (1984).'; reference[48]='Babrauskas, V., and W.J. Parker. \"Ignitability Measurements with the Cone Calorimeter.\" Fire and Materials 11 (1987).'; reference[49]='Babrauskas, V., and G. Mulholland. \"Smoke and Soot Data Determinations in the Cone Calorimeter,\" in Mathematical Modeling of Fires, 83-104, (ASTM STP 983). ASTM, 1987.'; reference[50]='Babrauskas, V. \"The Cone Calorimeter , Fire Properties,\" in New Technology to Reduce Fire Losses & Costs, 78-87, S.J. Grayson and D.A. Smith, eds. London: Elsevier Applied Science Publishers, 1986.'; reference[51]='Messerschmidt B. (Danish Institute of Fire Technology), Wickström U., Van Hees P. (SP Swedish National Testing and Research Institute), Prediction of SBI test results by means of cone calorimeter test results; Interflam’ 99, conference Proceedings volume 1, pp 11-22'; reference[52]='Wickstrom U., Goransson U., Fire and Materials, Vol 1, 15-22 (1992), Full-scale/bench-scale correlations of wall and ceiling lining.'; reference[53]='Wickstrom U., Goransson U., Journal of Testing evaluation, Vol. 15, N°6, (Nov) 1987, 364-370, Prediction of heat release rates of surface material in large-scale fire tests based on cone calorimeter results.'; reference[54]='S.J. Grayson, A.M. Green and S. Gregory, Fire Testing Technology Limited UK, Predicting the fire performance of products from bench scale fire tests; Flame Retardants’ 2000, Conference Proceedings, pp 15-26'; reference[55]='Alain Sainrat, Chritian Moulinier, Laboratoire National d’Essai, France, A new small scale test apparatus for the control and the development of products in relation with the Euroclasses; Flame Retardants’ 2000, Conference Proceedings, pp 27-40'; reference[56]='prEN 45-545 : Railway applications - Fire safety on railway vehicles.'; reference[57]='ISO TR 9122-4 : Toxicity testing of Fire effluents - part 4 - The Fire model (furnace and combustion apparatus used in small-scale testing).'; reference[58]='ISO TR 13344 : Determination of the lethal toxic potency of fire effluents.'; reference[59]='Federal Railways Administration 2000 requirements, 49 CFR, Transportation, Subtitle B, Other Regulations Relating To Transportation CHAPTER II , FEDERAL RAILROAD ADMINISTRATION, DEPARTMENT OF TRANSPORTATION, PART 238, PASSENGER EQUIPMENT SAFETY STANDARDS, October 1, 2000.'; reference[60]='pr EN ISO 11925-2 : Reaction to fire tests for building products - part 2 : Ignitability when subjected to direct impingement of flame.'; reference[61]='UIC 546-2 Appendix 11 : Regulations relating to fire protection and fire-fighting measures in passenger-carrying railway vehicles or assimilated vehicles used on international services. Appendix 11. Test method for determining the fire-resistance of rigid thermoplastic materials.'; reference[62]='ISO 5660-1 : Fire tests - Reaction to fire. Part 1: Heat release (cone calorimeter method).'; reference[63]='IEC 60695-2-2 : Fire hazard testing for electro technical products. Part 2 : Test methods. section 2.2 : Needle-flame test.'; reference[64]='ISO 5658-2 : Reaction to fire tests - Spread of flame - Part 2 : Lateral spread on building products in vertical configuration.'; reference[65]='pr EN ISO 9239-1 : Reaction to fire tests for floorings - Part 1 : Determination of the burning behaviour using a radiant heat source.'; reference[66]='ISO DIS 5660-2 : Fire tests - Reaction to fire. Part 2 : Smoke production rate (dynamic measurement).'; reference[67]='ISO 5659-2 : Plastics - Smoke generation - Determination of optical density by a single chamber test.'; reference[68]='NF X 70-100 : Fire tests - Analysis of pyrolysis and combustion gases - Tube furnace method.'; reference[69]='DIN 53436 : Producing thermal decomposition products from materials in an air stream and their toxicological testing.'; reference[70]='ISO 9705 : Fire tests - Full scale room test for surface products.'; reference[71]='pr EN 13823 : Reaction to fire tests for building products - Building products excluding floorings exposed to the thermal attack by a single burning item (SBI test).'; reference[72]='EN 597-1 : Furniture - Assessment of the ignitability of mattresses and upholstered bed bases - Part 1 : Ignition source - Smouldering cigarette'; reference[73]='EN 597-2 : Furniture - Assessment of the ignitability of mattresses and upholstered bed bases - Part 2 : Ignition source - Match flame equivalent.'; reference[74]='pr EN 32952 - Parts 1 and 2 : Textiles - Burning behaviour of bedding items - Parts 1 and 2 - Ignitability by smouldering cigarette.'; reference[75]='pr EN 32952 - Parts 3 and 4 : Textiles - Burning behaviour of bedding items. Parts 3 and 4 - Ignitability by a small open flame.'; reference[76]='UIC 564-2 Annex 5 : Regulations relating to fire protection and fire-fighting measures in passenger-carrying railway vehicles or assimilated vehicles used on international services. Appendix 5 : Test method to measure the reaction to fire of covered textiles.'; reference[77]='UIC 564-2 Annex 13 : Regulations relating to fire protection and fire-fighting measures in passenger-carrying railway vehicles or assimilated vehicles used on international services. Appendix 13 : Test method to measure the ignitability of seats.'; reference[78]='pr EN 1021 Part 3: Furniture - Assessment of the ignitability of upholstered furniture - Part 3 : Ignition source : Flame equivalent to the flame from 20 g of newspaper.'; reference[79]='pr EN 1021 Part 4 : : Furniture - Assessment of the ignitability of upholstered furniture - Part 3 : Ignition source : Flame equivalent to the flame from 100 g of newspaper.'; reference[80]='NT FIRE 032 - Furniture calorimeter tests : Upholstered furniture : burning behaviour - Full scale.'; reference[81]='IEC 60695-2-10 : Fire hazard testing - Glow-wire flammability test method for materials.'; reference[82]='IEC 60695-2-4/2 : Fire hazard testing - Part 2 Test Methods - Section 4 sheet 2 : 500 W nominal pre-mixed test flame and guidance.'; reference[83]='IEC 60695-2-4/1 : Fire hazard testing - Part 2 Test Methods - Section 4 sheet 1 : 1 kW nominal pre-mixed test flame and guidance.'; reference[84]='pr EN 50264 : Railway applications - Railway rolling stock cables having special fire performance - Standard wall.'; reference[85]='pr EN 50266-2-4 : Cable calorimeter tests.'; reference[86]='FIPEC book : Fire Performance of Electric Cables - new test methods and measurement techniques - Final Report.'; reference[87]='NF F 16-101 : Rolling stock - Fire behaviour - Materials selection.'; reference[88]='NF F 16-102 : Rolling stock - Fire behaviour - Materials selection - Application for electrical equipment.'; reference[89]='NF 16-201 : Railxay Rolling stock - Fire resistance test for seats'; reference[90]='NF P 92-501 : Safety against fire - Building materials - Reaction to fire tests - Radiation test used for rigid materials, or for materials on rigid substrates (flooring and finishes) of all thicknesses, and for flexible materials thicker that 5 mm.'; reference[91]='NF P 92-503 : Safety against fire - Building materials - Reaction to fire tests - Electrical burner test used for flexible materials.'; reference[92]='NF P 92-504 : Safety against fire - Building materials - Reaction to fire tests - Flame persistence test and speed of flame spread.'; reference[93]='NF P 92-505 : Safety against fire - Building materials - Reaction to fire tests - Test used for thermoplastic materials - Dripping test.'; reference[94]='NF P 92-506 : Safety against fire - Building materials - Reaction to fire tests - Radiant panel test for flooring.'; reference[95]='NF P 92-510 : Safety against fire - Building materials - Reaction to fire tests - Determination of upper calorific value.'; reference[96]='NF EN ISO 4589-2 : Plastics - Determination of burning behaviour by oxygen index - Part 2 : Ambient-temperature test.'; reference[97]='NF X 10-702 : Fire test methods - Determination of the opacity of the fumes in an atmosphere without air renewal.'; reference[98]='DIN 5510 : Preventive Fire Protection in railway vehicles. Part 1: Levels of protection, fire preventive measures and certification, Part 2: Fire behaviour and fire side effects of materials and parts; Classifications, Demands and test methods, Part 4: Vehicle design; Safety requirements, Part 5: Electrical equipment; Safety requirements, Part 6: Auxiliary measures, emergency brake operation function; Information systems, fire alarms, fire fighting equipment; Safety requirements'; reference[99]='DIN 53438 : Testing of combustible materials; reaction against a flame of burner, Part 1: General remarks, Part 2: Edgeing flame action, Part 3:Surface flame action.'; reference[100]='DIN 54837 : Testing of materials, small components and component sections for rail vehicles; Determination of burning behaviour using a gas burner.'; reference[101]='DIN 4102 : Behaviour of building materials and components in fire - Part 1: Building materials, terminology, requirements and tests - Part 14: Floor coverings and floor coatings; determination of rate of flame spread using a radiant heat source.'; reference[102]='DIN 54431 : Testing of seats in railways for public traffic; determination of burning behaviour with a paper pillow ignition source.'; reference[103]='TL 918433 : Technical specifications for delivery; material combinations, passenger seats; particular demands against burning behaviour.'; reference[104]='BS 6853 : Code of practice for fire precautions in the design and construction of passenger carrying trains.'; reference[105]='BS 476-7 : Fire tests on building materials and structures - Part 7 : Method of test to determine the classification of the surface spread of flame of products.'; reference[106]='pr EN 2825 : Aerospace series - Burning behaviour, determination of smoke density and gas components in the smoke of materials under the influence of radiating heat and flames - Determination of smoke density.'; reference[107]='pr EN 2826 : Aerospace series - Burning behaviour, determination of smoke density and gas components in the smoke of materials under the influence of radiating heat and flames - Determination of gas components in the smoke.'; reference[108]='UNI 8456 : Combustible materials which can be hit by flame on both surfaces. Reaction to fire by applying a small flame.'; reference[109]='UNI 9174 : Reaction to fire of material which can be hit by flame with radiant heating.'; reference[110]='UNI 8457 : Combustible materials which can be hit by flame on one surface. Reaction to fire by applying a small flame.'; reference[111]='UNI 9175 : Reaction to fire of upholstered furnitures by applying a small flame.'; reference[112]='IEC EN 50267 : Common test methods for cables under fire conditions - Test on gases evolved during combustion of materials from cables'; reference[113]='IEC EN 50267 : Common test methods for cables under fire conditions - Test on gases evolved during combustion of materials from cables'; reference[114]='British Standard 5852, part 2, Fire tests for furniture, Methods of test for the ignitability of upholstered composites for seating by flaming sources, British standard institution, Maylands Avenue, Hemel Hempstead, Herts HP24SQ, UK, 1982.'; reference[115]='Furniture and Furnishings Fire Safety Regulations 1988, Statutory Instrument 1988 No. 1324, PART I: Ignitability test for polyurethane foam in slab or cushion form.'; reference[116]='TECHNICAL BULLETIN 117, Requirements, Test Procedure and Apparatus for Testing the Flame Retardance of Resilient Filling Materials Used in Upholstered Furniture, STATE OF CALIFORNIA, DEPARTMENT OF CONSUMER AFFAIRS, BUREAU OF HOME FURNISHINGS AND THERMAL INSULATION, 3485 ORANGE GROVE AVENUE, NORTH HIGHLANDS, CA 95660-5595, MARCH 2000.'; reference[117]='TECHNICAL BULLETIN 133, Flammability Test Procedure for Seating Furniture for Use in Public Occupancies, STATE OF CALIFORNIA, DEPARTMENT OF CONSUMER AFFAIRS, BUREAU OF HOME FURNISHINGS AND THERMAL INSULATION, 3485 ORANGE GROVE AVENUE, NORTH HIGHLANDS, CA 95660-5595, JANUARY 1991.'; reference[118]='European Directive 95/28/CE from European Parliament and Council from the 24 october th of 1995, OJ of EC, N) L 281, 23/11/95.'; reference[119]='NF C 32-070, Insulated cables and flexible cords for installations- Classification tests on cables and cords with respect to their behaviour to fire.'; reference[120]='Shinichi Sugahara, Department of Architecture, Graduate School of Engineering, University of Tokyo; Masashi Yoshida, Building Department, National Institute for Land and Infrastructure; Kazuo Ueda, Toyo Seiki Seisaku-Sho Ltd; A study on the structure of cone calorimeter as the authorized apparatus, Interflam’2001, Conference Proceedings Volume 1, pp 543-554'; reference[121]='Tuula Hakkarainen, VTT Buiding and Transport, Espoo, Finland, Correlation studies of SBI and cone calorimeter test results; Interflam’2001, Conference Proceedings Volume 1, pp 519-530'; reference[122]='Peter Briggs, Warrington Fire Research Centre, UK; Yannick Le Tallec & Alain Sainrat, Laboratoire National d’Essais, France; Serge Metral, SNCF, France; Silvio Messa, LSF, Italy; Hervé Breulet, ISSEP, Belgium; The Firestarr Research project on the reaction-to-fire performance of products in European trains, Interflam’2001, Conference Proceedings Volume 2, pp 519-530'; reference[123]='British Standard 6807, Methods of test for Ignitability of mattresses with primary and secondary sources of ignition, British standard institution, Maylands Avenue, Hemel Hempstead, Herts HP24SQ, UK, 1982.';; function showRef(evt, index) { helpOver(evt, reference[index], true, 280); }