Indopol™ H-1500... Indopol™ H-1500 by Ineos - SpecialChem4Polymers Tweet Indopol™ H-1500 Supplier: Ineos Product performance: Colourless, practically non-toxic, hydrophobic polybutene. Used to increase impact strength, flexibility and melt flow rate of many thermoplastic resins, as a aid processing... and gloss properties. Provides very good tensile strength, elongation, low temperature flexibility and colour/UV stability. Gives durability, cling properties and low toxicity. Applications / Recommended for: Rubbers >> IR, Polysioprene Rubbers >> IIR, Butyl Rubber Rubbers >> NR, Natural Rubber PP

Chemstat G-1500 by Chemax Group - SpecialChem4Polymers Tweet Chemstat G-1500 Supplier: Chemax Group Product performance: External applications. Applications / Recommended for: PUR, polyurethane PP, Polypropylene PE, Polyethylene ABS/ SAN/ ASA, Acrylonitrile-Styrenic based PA... Chemstat G-1500

, the notched Izod impact strength is increased by approximately 16.3%. After annealed at 130 °C for 12 h, the impact strength of PP alone is increased by 336.7% compared to pristine PP, while this value is dramatically increased by 1107% for the PP containing 10 wt% of HDPE, which suggests... Synergistic Improvement of Toughness of PP... Synergistic Improvement of Toughness of PP

PP/FR/H... PP/FR/H by Blend Colours Pvt. Ltd. - SpecialChem4Polymers Tweet PP/FR/H Supplier: Blend Colours Pvt. Ltd. Product performance: Flame retardant masterbatch with LLDPE as a carrier resin. Possesses compatibility with PP. Used in injection molding. The recommended dosage for V2, & V0... are 10-12% & 25-30% respectively. Applications / Recommended for: PP

values due to the saturation of the interface. The optimum concentrations of PP-g-GMA compatibilizer was 0.05 wt.% and 0.025 wt.% in PP/PA6 and PP/PET systems, respectively. Source : Kiani, A.; Garmabi, H. Polymer Engineering Department, Amirkabir University of Technology, Tehran, Iran... Improved compatibilizers for PP/PA6 and PP

Licocene PP 1502 Granules... Licocene PP 1502 Granules by Clariant - SpecialChem4Polymers Tweet Licocene PP 1502 Granules Supplier: Clariant Product performance: Propylene-ethylene-copolymer wax. Acts as a tackifier for polyolefins. Applications / Recommended for: PE, Polyethylene PP, Polypropylene... TYPICAL PROPERTIES VALUE UNIT Density @ 23°C 0.87 g/cm 3 Softening Point 83 - 88 °C Viscosity @ 170°C 1500

; polyvinlychloride PVC rigid; polyvinlychloride PP, Polypropylene Extrusion TYPICAL PROPERTIES VALUE UNIT Density @ 23°C 0.90 g/cm 3 Softening point 146 °C Viscosity @ 170°C 1500 mPas Product type: Lubricants & Waxes >> Polypropylene waxes Chemical composition:   Polypropylene wax CAS Number:   9003-07... Licocene PP 6502 Fine Grain TP... Licocene PP

PVC rigid; polyvinlychloride PP, Polypropylene Extrusion TYPICAL PROPERTIES VALUE UNIT Density @ 23°C 0.90 g/cm 3 Softening point 146 °C Viscosity @ 170°C 1500 mPas Product type: Lubricants & Waxes >> Polypropylene waxes Chemical composition:   Polypropylene wax Physical form:   Granules... Licocene PP 6502 Granules TP... Licocene PP 6502 Granules TP by Clariant - SpecialChem4Polymers Tweet Licocene PP

Uninox H-132C by Pau Tai Industrial Corporation - SpecialChem4Polymers Tweet Uninox H-132C Supplier: Pau Tai Industrial Corporation Product performance: Chlorinated polyethylene. Acts as a modifier for plastics. Specially developed as a modifier for ABS, PE, PP, and PVC. Offers... Uninox H-132C... very good processing flowability. Imparts frame retardant with less damage of physical properties and prevention of dripping against direct fire. Applications / Recommended for: PVC rigid; polyvinlychloride PVC, flexible; polyvinlychloride PP

Zinc stearate H by Ferro - SpecialChem4Polymers Tweet Zinc stearate H Supplier: Ferro Product performance: Paper, concrete, rubber and cosmetic industries are also a field for application. Applications / Recommended for: PP, Polypropylene PVC rigid; polyvinlychloride PE... Zinc stearate H

>> Films (blown) TYPICAL PROPERTIES VALUE UNIT Additive content (Antiblock) 5.0 % Specific gravity 0.952 g/cm³ Bulk density 34.3 lb/ft³ Moisture content 1500 ppm Product type: Antitack (antiblock) agents Food contact approval:   Yes Other products with same trade name:    Polybatch® AB 1910... VT    Polybatch® AB 5 L    Polybatch® AB PP 02    Polybatch® AB PP

A Novel Method for Preparing Nanoparticle-coated Additives Used in PP Composites... A Novel Method for Preparing Nanoparticle-coated Additives Used in PP Composites - R&D Highlights Sort By: Read more... Special Featured R&D Highlights     0 0 Tweet More A Novel Method for Preparing Nanoparticle-coated Additives Used in PP

Lignin as Additive in PP... Lignin as Additive in PP - R&D Highlights Sort By: Read more... Special Featured R&D Highlights     0 0 Tweet More Lignin as Additive in PP Duane Priddy Sr. - Feb 1, 2012 Technical Paper - PP/CF composites were prepared and the effect... of lignin incorporation in the presence and absence of compatibilizer (maleic anhydride grafted polypropylene, PP

Environmentally degradable PP... Environmentally degradable PP - R&D Highlights Sort By: Read more... Special Featured R&D Highlights     0 0 Tweet More Environmentally degradable PP Duane Priddy Sr. - Mar 19, 2010 Technical Paper - This article describes the effect... of pro-degradant additives on degradation behavior of PP

describies the preparation of a novel photo-degradable PP by the addition of TiO 2 microencapsulated in polyethylene oxide. Adsorbed H 2 O in the PEO phase and the TiO 2 photocatalytically react to produce hydroxy radicals which initiate PEO degradation. The degraded PEO produces an acid and an aldehyde... , which were able to facilitate PP degradation. The addition of a hindered amine light stabilizer ( HALS ) suppresses the PP

Uvinul® 5050 H... Uvinul® 5050 H by BASF - SpecialChem4Polymers Tweet Uvinul® 5050 H Supplier: BASF Product performance: Sterically hindered amine. Acts as a light stabilizer for polyolefins. Provides very good light stabilization in film and thin-walled mouldings. Offers very good heat and light... stabilization properties. Used as an efficient light stabilizer for PP

Santoweb H-FIB... Santoweb H-FIB by Flexsys - SpecialChem4Polymers Tweet Santoweb H-FIB Supplier: Flexsys Product performance: It is a treated cellulose fiber product. It provides reinforcement, increases product stiffness and reduces cut growth rate. Can be used for low pressure hoses,gaskets... Rubber Rubbers >> EPDM, Ethylene Propylene Diene Rubber TYPICAL PROPERTIES VALUE UNIT Heat loss 0.75 - 3.5 % Ash 0.6 % Density @ 25°C 1270 kg/m3 Bulk density 500 kg/m3 Tensile strength in EPDM 1500

polyesters (PET, PBT), polyolefins (PP, HDPE). Applications / Recommended for: PET / PETG , Polyethylene Terephthalate / Polyethylene Therephthalate Glycol PP, Polypropylene PBT, Polybutylene Therephthalate PE, Polyethylene >> HDPE, High Density Polyethylene Dry blending/ Grinding Extrusion Injection...    Bruggolen® F 10    Bruggolen® H 12    Bruggolen® H 14 View all products from Brueggemann Chemical Other products: Nucleating agents (121) Disclaimer Product Technology Supplier Doc Get support Product Technology Supplier Doc Get support

Uvinul® 5062 H by BASF - SpecialChem4Polymers Tweet Uvinul® 5062 H Supplier: BASF Product performance: Sterically hindered amine, oligomeric. Used as light stabilizer/UV absorber for polyolefins and PA. Applications / Recommended for: PP, Polypropylene PE, Polyethylene PA... Uvinul® 5062 H... - 4000 g/mol Melting point 50 - 70 °C Product type: Light stabilizers / UV absorbers >> HALS, Hindered Amine Chemical composition:   Sterically hindered amine, oligomeric Physical form:   Powder CAS Number:   65447-77-0 Other products with same trade name:    Uvinul® 4049 H

-treated MWCNTs had a better dispersion than the untreated ones in nonpolar solvents. Subsequently, MWCNTs-reinforced polypropylene (PP) composites were prepared by internal batch mixing with the addition of 1.0 wt % MWCNTs. The morphology of MWCNTs/PP nanocomposites was studied through scanning electron... microscopy. Observations of SEM images showed that the plasma-treated MWCNTs had a better dispersion than the untreated MWCNTs either on the composite fracture surfaces or inside the PP